How much is an old Craftsman table saw worth?

How much is an old Craftsman table saw worth? A Craftsman model 113 table saw in solid working condition can go for approximately $100-$200 depending on the state it is in. Even a non-functioning saw can go for $50-$80, as many enthusiasts want vintage parts.

Are old Craftsman table saws any good?

Without a doubt, the older Craftsman table saws are decent tools and are considerably better than my little Delta contractor saw. The short of it is that the saw has the potential to be a nice addition to my shop. At first glance this saw looks a little like a rust bucket, but looks can be deceiving.

What is a Craftsman 10 inch table saw worth?

$199 The Craftsman 10-in table saw retails for $199 from your local Lowes or online. It comes with the portable stand, the rip fence, a blade guard, anti-kickback pawls, miter gauge, 2 blade wrenches, a push stick, and a 10-inch 24T carbide blade. Craftsman backs this saw with a 3-year warranty.

Do they still make Craftsman table saws?

If you look at the listing of the older model saw on Craftsman.com, now under Stanley Black & Decker control, it says: The product you searched for is no longer available. There are, however, many other retooled, refined, and readily available products.

Who made Craftsman table saws?

The current Craftsman 21833 and Ridgid R4512 are supposedly made by Dayton. Over the years, TTI/Ryobi has made several of the portable jobsite saws for both Sears and Ridgid.

How much does a Craftsman table saw weigh?

SpecificationDimesnsionsTable Dimensions with Extensions:40″ X 27″Product Overview:Item Weight (lbs.):288.0 lbs.PortabilityMobile46 more rows•30 Sep 2015

How much does an old Craftsman table saw weigh?

SpecificationDimesnsionsProduct Overview:Item Weight (lbs.):288.0 lbs.PortabilityMobileGeneral Warranty:12 months46 more rows•30 Sep 2015

When should you not use a riving knife?

When to Remove the Riving Knife A good example is when using a stacked dado blade to cut a dado or a rabbet. Because this type of blade does not create a through cut, a riving knife would serve no purpose. In fact, it would actually get in the way, blocking the completion of the cut.

Who made Craftsman table saw?

In 2009, Steel City/Orion made the 22116 for Craftsman, and the Ridgid R4511. The current Craftsman 21833 and Ridgid R4512 are supposedly made by Dayton. Over the years, TTI/Ryobi has made several of the portable jobsite saws for both Sears and Ridgid.

Who builds craftsman Tablesaw?

The current Craftsman 21833 and Ridgid R4512 are supposedly made by Dayton. Over the years, TTI/Ryobi has made several of the portable jobsite saws for both Sears and Ridgid.

What is Rip capacity on a table saw?

Rip capacity on a table saw refers to the space that lies between the edge of the tables saw and the fences edge when its been extended to the maximum. Rip capacity can be increased by extending one side of your table, readjusting the existing fence and railing, or by buying a table extension.

Where is the model number on a Craftsman table saw?

Locate the model number. On saws, it is usually a silver sticker near the motor. It could also be on the frame.

Who manufactured the table saw?

Table sawA cabinet table saw, equipped for cutting large pieces of sheet stock in the direction of the woods grain (also known as ripping)Other namesSawbenchClassificationPower toolManufacturerDelta, Crown, Yato, SawStop, Milwaukee, Skilsaw, Bosch, Makita, Ryobi, Black & Decker/DeWalt, among others

How much does a craftsman contractor saw weigh?

Size and Weight As with most contractor table saws they tend to be too heavy to take from jobsite to jobsite. and the Craftsman 10 ” Contractor saw is no exception. it weighs in at impressive 265 lbs, so will definitely need 2 or more people to lift it and is one of the heavier contractor saws available.

Who makes Craftsman Tablesaws?

The current Craftsman 21833 and Ridgid R4512 are supposedly made by Dayton. Over the years, TTI/Ryobi has made several of the portable jobsite saws for both Sears and Ridgid.

Do you really need a riving knife?

Because this type of blade does not create a through cut, a riving knife would serve no purpose. In fact, it would actually get in the way, blocking the completion of the cut. In nearly every other case, though, the riving knife should be used when making standard rip cuts and crosscuts with your table saw.

Should you remove riving knife?

A riving knife has these advantages over a splitter: It does not need to be removed from the saw when cross-cutting or doing a blind (non-through) cut as it does not extend above the top of the saw blade. If it is not removed, the operator cannot forget to put it back on.

Can a 10 inch table saw rip a 4x4?

So, can you cut a 4×4 with a table saw? A standard 10 inch table saw cant cut all the way through a 4×4 in one pass. The deepest cut a 10 inch blade can cut is about 3-⅛ inch. A high-end table saw with a 12 inch blade can cut a 4×4 in one pass with maximum cut of about 4 inches.

Can a 10 inch table saw cut a 4x4?

Cutting Depth and Blade Size With a 10-inch table saw, you can make a maximum cut up to 3.5-inches deep, and with a 12-inch table saw, you can cut up to 4-inches deep.

How do you read a craftsman serial number?

1:011:33Find The Year Of Your Craftsman Lawn Mower - YouTubeYouTube